Configuration Requirements
EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
User Manual Sungrow AC22E-01
iEnergyCharge App
Configuration device: mobile phone
UTP cable
Follow the steps
Step 1: Scan the QR code below, and download the iEnergyCharge App by following the onscreen instructions.
Step 2: Open the app and tap Add device on the Home screen.
Step 3: Scan the QR code on the side of the charger and tap Establish Connection.
Step 4: Go to WLAN settings on your mobile device, and connect to the charger's WLAN.
Step 5: Once connected successfully, go back to the App and enter the username and password:
Username: admin
Password: pw8888
Step 6: Select OCPP as the charging mode and enter the following server address:
When using a white Road sim card or another connection method ws://ocpp.road.io/<provider-slug>
When using a purple Road sim card ws://ocpp-internal.road.io/<provider-slug>
Step 7: Connect the charger to a stable WLAN network.
Step 8: After network connection is established successfully, tap add device and tap complete to finalize the commissioning process.
The charging station is now connected to the Road platform!