Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Configuration device: laptop
UTP cable
Follow the steps
Step 1: Switch off the charger's power supply and open the front cover of the charging station.
Step 2: On the motherboard, set the N1N2 (5/6) dial switch to ON as shown in the picture below.
Step 3: Plug one end of a network cable into the WLAN port on the motherboard and connect the other end to your laptop. Switch the charger's power supply back on once the cable is connected.
Step 4: Set up a Static IP address on your macOS or Windows 10 laptop:
MacOS:
Windows 10:
Step 5: Enter the following web address in your browser to enter the web page of the charger: http://192.168.1.253/index.html. Login with the following credentials:
Username: root
Password: root@123456
Step 6: Navigate to the Configuration menu and change the CsmsWebsocketUrl to:
ws://ocpp.road.io/<provider-slug> -> When using a white Road SIM card or another connection method.
ws://ocpp-internal.road.io/<provider-slug> -> When using a purple Road SIM card.
*If a Road SIM card is used to set up the connection, the SimCardAPN must be set to:
m2m.services -> When using a purple Road SIM card:
road.io -> When using a purple Road SIM card:
Step 7: Go to the Network menu and select SWITCH_CODE as the server network method.
Step 8: Set the N1N2 (5/6) selector switch on the motherboard according to the network method used:
WiFi:
4G:
LAN:
Step 9: Reboot the charger to finish the configuration process.