Configuration Requirements
EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station.
Online installation & user guide Ratio Electric.
Ratio EV charging app.
Mobile phone.
Follow the steps:
Step 1: Connect the charger to the Ratio EV Charging app
Make sure the charger is connected to your mobile phone with Bluetooth.
Tap My chargers on the home screen.
Tap Add charger.
A list of all available chargers is shown.
Select the charger with the corresponding serial number.
Enter the 6-digit Bluetooth code and press Connect.
If the connection is successful, the charger is added to the My chargers screen.
Step 2: Go to OCPP settings
Go to Settings, then to Advanced settings in the Ratio EV Charging app. Click on the OCPP settings button at the bottom of the screen.
Step 3: Choose E-Flux as back office provider
Click on Open Charge Point provider and fill in the following server URL:
When using a white Road SIM card or another connection method:
ws://ocpp.road.io/<provider-slug>When using a purple Road SIM card:
ws://ocpp-internal.road.io/<provider-slug>
Under OCPP settings you will now see the Charge Point ID of the charger. This Charge Point ID can be easily copied and must be used to register the charger on the Road portal.
