Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Installation manual Schrack Technik
Configuration device: laptop
Micro-USB cable
Follow the steps
Step 1: Setup a connection between the charger and your laptop by connecting the laptop to the same local network as the charger or by connecting a micro-USB between the two devices.
Step 2: Once you’ve setup the connection between the laptop and the charger, you can access the configuration page via the following web address: 192.168.123.123.
Step 3: Navigate to the Backend settings of the charger.
Step 4: Enter the following values to setup the connection with Road:
Connection Type: Choose one of the connection methods shown below.
GSM (APN name road sim card: m2m.services)
WLAN
ETHERNET
USB
OCPP ChargeBoxIdentity (ChargePointID): Enter the unique serial number of the charger
OCPP Mode: OCPP-J 1.6
WebSockets JSON OCPP URL of the backend:
When using a white Road SIM card or another connection method: ws://ocpp.road.io/<provider-slug>
When using a purple Road SIM card: ws://ocpp-internal.road.io/<provider-slug>
Websockets proxy: -
WebSockets keep-alive interval: 60
OCPP connection strictness: -
HTTP Basic Authentication password: -
Note: When using a purple Road SIM card the APN name should be changed to: road.io. When using the white Road SIM card or another SIM card the APN name should be m2m.services.
Step 5: Check the connection with the backend in the Diagnostics menu.
