Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Cable (Included with charging station)
Configuration device: laptop/mobile phone
Mennekes installation manual:
Follow the steps:
Step 1: After a safe installation of the Mennekes charger with the help of the installation manual, you can set up a connection with the charger to change the configuration. This can be done by connecting a PC or laptop to the charger and takes place in the Mennekes web interface.
USB
Connect the PC or laptop to the charger with a USB cable
Open the web browser and enter the following address in the searchbar: http://192.168.123.123
Ethernet
Connect the PC or laptop to the charger with an ethernet cable
Change the network settings of the PC or laptop to the following values:
IPv4-adres: 192.168.124.21
Subnetmask: 255.255.255.0
Standard gateway: 192.168.124.1
Open the web browser and enter the following address in the searchbar: http://192.168.124.123
Network
Connect the charger to the network via ethernet
Connect a PC or laptop to the same network via the router/switch
Open the web browser and enter the IP address of the charger (e.g. http://192.168.0.70)
Step 2: A window will appear where you can log in. Login with the username operator. The password can be found on your own supplied data sheet.
Note: each socket has its own password to log in to the web interface
Step 3: Once you’ve logged into the web interface, go to Network to configure the GSM or LAN settings. If you’re using the GSM connection method, please fill in the following details:
Access Point Name (APN):
When using a white Road SIM card or another connection method: m2m.services
When using a purple Road SIM card: road.io
All other data will be filled in automatically and you can leave it as it is
Step 4: Click on save to save the network settings.
Step 5: Click on Backend and enter the following data:
Connection Type: GSM or Ethernet
OCPP ChargeBoxIdentity: Enter the unique serial number of your charger here. If you have received an EVSE ID (NL*EFL*EV*1234567) from Road, enter this number here.
OCPP Mode: OCPP-J 1.6
Websockets JSON OCPP URL of the backend:
When using a white Road SIM card or another connection method: ws://ocpp.road.io/<provider-slug>
When using a purple Road SIM card: ws://ocpp-internal.road.io/<provider-slug>
Leave the rest of the settings as they are.
Step 6: Click on save and reset the charging station.