Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Online Installation Manual GL Charge
Configuration device: laptop
Ethernet cable
Follow the steps
Step 1: Connect the PC to the charger via an Ethernet cable.
Step 2: Set the IP address of the PC:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Step 3: Open a web browser and navigate to http://192.168.1.2.
Step 4: Log in to the web interface:
Username: installer
Password: installer
Step 5: In the menu of the web interface, select Ethernet or GSM as the priority connection and configure the network settings accordingly:
Ethernet:
Navigate to the Ethernet tab
Choose the IP address allocation method:
DHCP: Automatically obtain an IP address
Static IP: Manually enter the IP address, subnet mask, gateway, and DNS servers
Save the settings
GSM:
Navigate to the GSM tab
Enter the SIM card settings from Road:
APN:
When using a white Road SIM card or another connection method: m2m.services
When using a purple Road SIM card: road.io
PIN code: ‘Not required’
Username and Password: ‘Not required’
Save the settings
Note: you can configure both Ethernet and GSM connection on the charger, the charger will use the primary connection by default and switch to the secondary if the primary is unavailable.
Step 6: Navigate to the OCPP tab and enter the following values:
Host Address:
When using a white Road SIM card or another connection method: ws://ocpp.road.io/<provider-slug>
When using a purple Road SIM card: ws://ocpp-internal.road.io/<provider-slug>
Charge Point Identity: ‘Enter the serial number of the charger’
Security Settings: ‘Not required’
Step 6: Click on the Save button to apply the changes and click on Restart OCPP to connect with the central system.