Configuration Requirements
Road Sim card, EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station.
Online guide Etrel.
Laptop equipped with a Windows operating system.
UTP cable.
Follow the steps:
Step 1: Connect the charger to your laptop via a UTP cable, the input for this can be found on the bottom left of the charging station.
Step 2: Set your network connection to a fixed IP address, you do this through the following steps:
Go to Network and Internet settings.
Click on Ethernet.
Click on Adapter Options.
Click on Ethernet.
Click on Properties.
Click on Internet Protocol version 4 (TCP /IPv4) twice.
Then enter the following information:
IP Address: “192.168.1.241”.
Subnet mask: “255.255.255.0”.
Default gateway: “192.168.1.1”.
Leave the remaining boxes blank and click Ok.
Step 3: Open your browser and enter the following address in the URL bar: “192.168.1.250”.
Step 4: Log in with the following details:
Username: [email protected].
Password: “toor”.
Step 5: Click on the three dashes at the top left, then click on configuration.
Step 6: Select connectivity, then click on GSM connectivity.
Step 7: Enter the following details:
APN:
When using a white Road SIM card or another connection method:
m2m.servicesWhen using a purple Road SIM card:
road.io
Username: “leave empty”.
Password: “leave empty”.
Ping server: “8.8.8.8”.
Ping interval: “60”.
Click on save.
Step 8: Next, under the Connectivity heading, press Central system connectivity and set the following details:
Charge point identity: enter the number on the sticker provided here, this is usually the EVSE ID (NL*EFL*EV*XXXXXXXXX).
Protocol Type: “OCPP 1.6 JSON”.
Central system endpoint URL:
When using a white Road SIM card or another connection method:
ws://ocpp.road.io/<provider-slug>When using a purple Road SIM card:
ws://ocpp-internal.road.io/<provider-slug>
Step 9: Then return to the dashes at the top and press diagnostics. Then, select restart charger.