Configuration Requirements
EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Configuration device: laptop/mobile phone
WiFi connection
Follow the steps:
Step 1: You will need to connect to the WiFi (hotspot), which is emitted from your charge point. All EVC04-Models have a WiFi hotspot feature which is enabled by default. The following credentials can be used to access the internet signal of your charge point:
WiFi name or SSID: Serial number of your charge point
Password: Chargebox-ID
Step 2: After connecting to the "Wi-Fi Hotspot” network, you can open your web browser from a computer or mobile device. In the URL section, enter 192.168.1.1, which is the IP-address of the charging station.
Step 3: Once you’ve entered the URL, you will be forwarded to the WebUI login page. Use the following credentials to login to the web interface:
User Name: admin
Password: admin
Step 4: Once in the WebUI, go to OCPP settings and enable the OCPP connection. After that you have to fill in the following details:
Central system address: ws://ocpp.road.io/<provider-slug>
Charge Point ID: *enter your charge point ID here*
Step 5: Scroll down to the field AuthorizationKey and fill in FFFFFFFF as shown in the screenshot below.
Step 6: Click on Save.
Step 7: Now it is time to connect your charge point to the internet. To do so, navigate to the Network interfaces section and select WIFI. Fill in the following details:
SSID: *your WiFi’s exact name*
Password: *your WiFi's password*
Step 8: After you have filled in the information, please click on Save.