Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station.
Online installation & user guide manufacturer.
Configuration device: laptop/mobile phone.
Follow the steps:
Step 1: Connect your device to your charge point
Using your mobile device or laptop, search for the charge point’s hotspot. It would follow this format: EO-#######. The password to this hotspot will be the numeric portion of the hotspot name.
Step 2: Open a browser to 10.10.10.1
Now when connected to the hotspot, open a browser and enter 10.10.10.1 and hit Enter.
Step 3: Login to the page
Login to the page with these credentials. Please note that the password is the Hostname, which is visible on the login page below.
Login: “Installer".
Password: numeric portion of the Hostname.
Step 4: Edit the CSMS settings
Navigate to the CSMS tab on the left side menu. Change these parameters:
CSMS Server Address:
When using a white Road SIM card or another connection method:
ws://ocpp.road.io/<provider-slug>When using a purple Road SIM card:
ws://ocpp-internal.road.io/<provider-slug>
Charger Identity: leave it on default, otherwise use the serial number of the charge point.
Offline Authorization is disabled.
Default id Tag mode is disabled.
Default ID Tag: 8 capital F’s - "FFFFFFFF".
RFID is enabled.
Click on Save.
Step 5: Connect the charge point to the Internet
Navigate to the Network tab on the left side menu. In this example, we are connecting the charge point to the Internet via WiFi. Enable WiFi using the toggle. Here, you can either manually enter your WiFi credentials or scan for an available network.
Manually enter credentials
WiFi SSID: *your WiFi name*.
WiFi PSK: *your WiFi password*.
Scan for an available network
Click on the Refresh List button, located in the upper right corner of the screen.
Your WiFi network should appear. Select it and click on Use as WiFi SSID.
Enter your WiFi password manually.
Click on Save.
Note:
When using a purple Road SIM card the APN name should be changed to: road.io. When using the white Road SIM card or another SIM card the APN name should be m2m.services
Step 6: Enter the Admin tab
Navigate to the Admin tab on the left side menu. Click on Restart under the SCC client. Afterwards, restart the EVSE.
Once the charge point is rebooted, you can continue to connect it to the Road platform. Please, prepare the serial number of the charge point, as you will need it for the next steps.