Configuration Requirements
EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Witty Share installation manual XEV1R22T2(XX)
RFID hotspot badge
Configuration device: laptop/mobile phone
Follow the steps:
Step 1: Activate RFID hotspot badge
When the charger is installed, power up the charger. Activate RFID hotspot badge. See the manual supplied by Hager.
Step 2: Activate the WiFi hotspot and connect your smartphone or laptop
Activate the WiFi hotspot with the RFID hotspot badge. Connect your tablet or smartphone and login to the charging station or connect the charger to your laptop by connecting the UTP cable. The hostname address is: Https://hager-evcs-”last 6 digits of the UID” (see sticker on the charger) or by direct UTP linking using IP address 192.168.0.100.
Step 3: Login to the charging station
Login with the following data:
Username: admin
Password: 1234
Step 4: Connect the charger to the Road backoffice URL
Go to configuration
Change Config Type: protocol to OCPP
Fill out the CPO connection address: ws://ocpp.road.io/<provider-slug>
Fill out the unique Charge Point ID supplied by Road or use the serial number of the charger
Step 5: Reboot the charging station