Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station.
Installation guide Kempower.
Laptop.
UTP cable.
Follow the steps:
Step 1: Change your network settings. Here, you need to change the network settings of your computer according to the charge point's local IP. To do so, click on the Internet icon in the bottom-right corner of your computer screen. From there, open the Network & Internet Settings of your device.
Step 2: Select Change adapter options, located in the Advanced network settings.
Step 3: Once you enter the Change adapter options, find the Ethernet adapter, right-click on it, and select Properties.
Step 4: In Ethernet Properties, find the Internet Protocol Version 4 (TCP/iPv4), click on it, and press Properties.
Step 5: Once you are there, select Use the following IP addresses, if not selected, and enter the values as follows:
IP address: 192.168.100.10.
Subnet Mask: 255.255.255.0.
Step 6: After filling in the values, click on OK and close the window.
Step 7: Prepare the charge point for connection. These are the preparation steps you need to take before you can connect your charge point to Road.
Disconnect the charge point from the AC supply and wait 2 minutes before opening the covers!
Open the T-series front cover and connect an Ethernet cable to the RJ45 connector.
Power on T-series charge point.
Connect the Ethernet cable’s other end to the PC.
Step 8: When the charge point is up and running, open a web browser on your PC and type in the address: https://192.168.100.200:8443
Please note that some web browsers probably show warnings about certificates. Firefox browser is used as an example here. You will see a similar screen. Click on Advanced... and click on Accept the Risk and Continue.
Step 9: Now the security key must be filled in. The key text file is delivered separately. Copy and paste the whole text file (including beginning and ending headers) to this dialog and click on the Login button.
Disclaimer: Do not share this key publicly!
Step 10: Click on Network on the left side menu. If WiFi is enabled, you need to disable it. Enable Legacy USB Modem. No need to write anything in the SIM card ICCID field.
Step 11: Navigate to Settings on the right side menu, and click on Connectivity & Integrations. Enable OCPP 1.6. backend with the toggle and enter the following values:
Endpoint URL:
When using a white Road SIM card or another connection method: ws://ocpp.road.io/<provider-slug>
When using a purple Road SIM card: ws://ocpp-internal.road.io/<provider-slug>
Charge point identity: *use the serial number of the charge point*.
Now click on Save and Sync.
Note: When using a purple Road SIM card the APN name should be changed to: road.io. When using the white Road SIM card or another SIM card the APN name should be m2m.services.
