Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Laptop
UTP cable
Follow the steps:
Step 1: Make sure to have a local connection with the charging station via UTP
Go to http://ev3000.local:3000
Step 2: Log in using the following credentials:
Username: operator
Password: blitzoperator91500591
Step 3: Click on Quick setup
Step 4: Connect the station to the Internet (see image below)
You can do this one of these two ways:
UTP:
Click on DHCP
The IP address and the subnet mask will be filled in automatically;
Enter the Gateway. You do this by copying your IP address and replacing the last number of it with a 1.
For example: If your IP address is 192.168.2.36, delete “36” and write “1” instead. Your Gateway should then be - 192.168.2.1
OR
Sim-card:
Enter SIM card details:
Sim Pin – leave this field empty;
APN – enter –
When using a white Road SIM card or another connection method:
m2m.servicesWhen using a purple Road SIM card:
road.io
Save the changes.
Step 5: Go to Charge Points and indicate which charge points you want to connect to the OCPP or click on Configure All
Step 6: Select Add new provider and enter the Provider URL:
When using a white Road SIM card or another connection method:
ws://ocpp.road.io/<provider-slug>When using a purple Road SIM card:
ws://ocpp-internal.road.io/<provider-slug>
Step 7: Click Save
