Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Laptop
UTP cable
Step 1: Login to the Evonity Platform, URL: Go to http://ev3000:81
Username: operator
Password: operator
Step 2: Configure EVSE, Navigate to the Charging stations overview > EVSE configuration:
Step 3: Find the EVSE you want to configure and click the '+' icon next to it.
Click on the configuration icon.
Step 4: Make the following configuration settings: Set the enable mode to 'by OCPP'.
Step 5: Choose the lock mode of the socket: 'At EV connected - disconnected' for automatic locking when connected to a vehicle.
'by remote control' for remote locking via OCPP.
Click 'Save changes' to save your configuration.
Step 6: Go to the OCPP Configuration Overview.
Enter the backend URL and add '/OCPP ID' at the end, replacing 'OCPP ID'with your specific OCPP ID.
Like this:
When using a white Road SIM card or another connection method:
ws://ocpp.road.io/<provider-slug>/<OCPP>When using a purple Road SIM card:
ws://ocpp-internal.road.io/<provider-slug>/<OCPP>
After entering the correct URL, click 'Save changes'.
Note:
When using a purple Road SIM card the APN name should be changed to: road.io. When using the white Road SIM card or another SIM card the APN name should be m2m.services
Step 7: Then click 'Restart OCPP' to restart the OCPP connection with the new configuration.