Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Online installation & user guide E-Totem
Computer with ethernet port
Ethernet cable
A web browser (Chrome, Firefox, Edge…)
Follow the steps
Step 1: Plug the ethernet cable in your computer and on the left ethernet port of the charger.
Note: The PC might be placed in a different area, depending on the charger type. Refer to the documentation of the charger to locate it.
Step 2: Configure your computer’s network adapter settings to the following values:
Fixed IP address: 192.168.20.10
Subnet mask: 255.255.255.0
Step 3: Open your web browser and type in: 192.168.20.134/webadm/
Step 4: The web browser should then show the WebAdmin login page. The WebAdmin is a webpage UI situated inside the E-totem chargers.
Note: If the WebAdmin does not open in your current browser, please try a different web browser.
Step 5: Enter your username, password, and click login. By default, the login is admin and the password system.
Step 6: Go to Settings and click on the Supervision tab.
Step 7: Fill in the following values in the Supervision tab:
Charge Box Identity: enter the unique serial number of the charger or use the EVSE ID provided by Road.
URL du superviseur ws JSON:
When using a white Road SIM card or another connection method:
ws://ocpp.road.io/<provider-slug>When using a purple Road SIM card:
ws://ocpp-internal.road.io/<provider-slug>
Note: Do not change any other fields, as it might compromise other services on the charger.
Step 8: Click on the Network tab, and enter the following values:
APN for the 3G link:
When using a white Road SIM card or another connection method:
m2m.servicesWhen using a purple Road SIM card:
road.io
Note: Do not change any other fields, as it might compromise other services on the charger.
