Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Installation guide Delta Electronics
Follow the steps
Step 1: Send an email to [email protected] with the request to create a configuration file to connect the Delta charger to the Road backend. Road will create the configuration file and share it with the installer or customer.
Step 2: Format a USB to FAT32 and upload the configuration file to the USB.
Step 3: Insert the USB into the charging station and wait until the configuration file is uploaded.
Step 4: Remove the USB from the charging station.
In case you want to configure another Delta charger to the Road backend, please follow the following steps:
Open the configuration file
Change the Chargebox Identity to the unique serial number of the charger (or another EVSE-ID)
Follow step 2 to 4 of this manual again