Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Installation Guide UrbanBox
Configuration device: laptop with Windows 11 installed
Ethernet cable
Follow the steps
Step 1: Connect the Ethernet cable to the switch that is underneath the controller.
Step 2: Select Network & Internet in your laptop settings menu and choose option Ethernet.
Step 3: Activate IPv4 and choose an IP Address in the range 192.168.2.200 to 192.168.2.220 (eg:192.168.2.200).
Step 4: Open the browser and insert the address: http://192.168.2.2:8080/index.html
Step 5: Select the menu Config and then the option Software Properties-RW.
Step 6: Look for the Isk.evse.Cfg.dl.uri parameter and click on it.
Step 7: Inside the Box Value write one of the following server URL’S:
When using a white Road sim card or another connection method ws://ocpp.road.io/<provider-slug>
When using a purple Road sim card ws://ocpp-internal.road.io/<provider-slug>
Step 8: Navigate back to the Home page and select Commands in the Status dropdown menu.
Step 9: Click on RESET SW to reboot the charger.
The charging station is now connected to the Road platform!