Configuration Requirements
Configuration package
Contains: Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
EATON Green Motion Duo Installation Manual
Configuration device: mobile phone
Follow the steps
Step 1: Enable WIFI on your phone and turn the EV charger OFF and ON. During the first 30 minutes after power-up or restart, the GM Duo Master creates a WIFI hot spot.
Step 2: Scan the QR code (or retype the SSID/Passphrase) and connect to the WIFI network which is provided by the GM Duo Master. The welcome commissioning screen should appear automatically in your browser.
Step 3: Press Next to start the commissioning process and accept the security warning by pressing Advanced and Proceed to unsafe IP address.
Step 4: Change the default password of the EV charger to continue.
Step 5: Navigate to the first screen of the commissioning wizard, select the internet connection method according to the local network configuration and configure the details of the selected method.
Step 6: On the Settings/OCPP server page press Edit OCPP Server button and enable the OCPP communication.
Step 7: Enter the following credentials:
CSMS (Backend): Custom
Protocol: OCPP 1.6j
Charge Point ID: ‘enter the ChargeBoxSerialNumber’
Server Address:
When using a white Road SIM card or another connection method: ws://ocpp.road.io/{provider-slug}
When using a purple Road SIM card: ws://ocpp-internal.road.io/{provider-slug}
Security profile: 0
Step 8: Press the Save and Reconnect button.
The charging station is now connected to the Road platform!