Configuration Requirements
Road Sim card, EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Enphase app setup for using IQ EV Charger
o For IQ EV Charger only sites without Enphase Solar or Battery system:
App setup guide (standalone)
o For IQ EV Charger on sites with Enphase Solar or Battery systems:
App setup guide (integrated)
Follow the steps:
Step 1: Install and commission the IQ EV Charger using the Enphase Installer Toolkit
App. You can add the charger to an existing site or create a new site
specifically for the IQ EV Charger.
If you're the owner and wish to commission your IQ EV Charger using the
Enphase App after installation, you can follow the steps in this Commissioning
guide
Step 2: Owners can customize their IQ EV Charger for optimal use via the Enphase
App by following the setup guides below
For IQ EV Charger only sites without Enphase Solar or Battery system:
App setup guide (standalone)For IQ EV Charger on sites with Enphase Solar or Battery systems:
App setup guide (integrated)
Step 3: Once the IQ EV Charger is installed and commissioned, owners can follow the
below steps to initiate the Partner integration.
Go to Menu - Settings -; IQ EV Charger - Partner Integration
Once on partner integration page select Road as the partner.
Go through the details and give consent to grant access of your system to Road
Once enabled the connection request for the charger is sent to the Road platform.
The charging station is now connected to the Road platform!