Configuration Requirements
EVSE ID and configuration manual for the installer and owner.
Schneider eSetup configuration app.
Configuration device: mobile phone.
Follow the steps:
Step 1: Download the eSetup app from the Apple appstore or Google playstore. Follow the instructions and accept the user agreement. After this you can create a account and log in. Now allow the acces to local devices in the network and to bluetooth.
Step 2: Choose the EVlink Pro AC in the main menu to start searching for the charger. Your charger will apear with active bluetooth. Click on your charging station and confirm the connection.
Note: The Bluetooth connection is only active for 2 hours after being turned on. After that it can be reactivated with an admin card.
Step 3: Enter a 6-digit code to set the pin-code for your charger.
Note: 123456 isn’t an option.
After that you will be able to connect to your charging station with the pin-code you’ve just set. As soon as the connection was established successfully you will have all of the charger’s features at your disposal.
Note: The first card you use will automatically become the admin card and will be able to turn Bluetooth on and introduce other charge cards to the charger.
Step 4: Navigate to Configuration. After that click on Backend Configuration
Step 5: To connect the charger to the backend it must be connected to the Internet via a modem or network.
In the backend URL enter - ws://ocpp.road.io/<provider-slug>
The charger ID is unique and should look like this - [EVlink Pro AC] - [20105]. Instead of [20105] please enter the ID of your charger.
Click on ON on top in the Backend connection field.
Choose All cards will be accepted in the Offline mode part.
