Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Installation manual PULSE
Configuration device: laptop
Follow the steps
Step 1: Take the SD card from the OCPP kit that’s located on the CPU of the charger.
Step 2: Open the config.exp file and modify the following keys:
ChargeboxId: ‘Enter the serial number of the charger’
OCPP_SERVER_URL: ws://ocpp.road.io/<provider-slug>
VersionOCPP: OCPP1.6
PDL_Power: ‘Enter the maximum power of the charger in kWh’
Note: This file can be modified using a text editor. Be careful, however, to retain the ANSI encoding of the file.
Step 3: Save the file, and change the extension to config.csv
Step 4: Put the SD card back in the OCPP kit and turn on the charger, the configuration will be uploaded automatically once the charger is powered on.