Configuration Requirements
EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Loxone Configuration application
Configuration device: laptop
Follow the steps
Step 1: Navigate to the Network menu in the Loxone application and add an OCPP Server Connector.
Step 2: Assign a name to the OCPP Server Connector and fill in following settings:
Server Address:
When using a white Road sim card or another connection method ws://ocpp.road.io/<provider-slug>
When using a purple Road sim card ws://ocpp-internal.road.io/<provider-slug>
Protocol: V 1.6
Step 3: Save the settings into the miniserver and wait for the circle to turn green.
Step 4: Click on Charging_Point_1 and change the Charging Point ID to the serial number of the charging station.
Step 5: Assign the newly created API to the wallbox and the NFC.
Step 6: Open the settings of the NFC Code Touch and change the authentication to 4 = OCPP.
Step 7: Save the settings into the miniserver.
The charging station is now connected to the Road platform!