Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
FusionCharge DC Charging System App Commissioning Guide (Europe)
Antohill App
Configuration device: mobile phone
Follow the steps
Step 1: Download the Antohill app on your mobile phone and complete the Local Device Commissioning process according to the FusionCharge DC Charging System App Commissioning Guide (Europe).
Step 2: Once the local commissioning is done, navigate to Maintenance → Business Platform in the Antohill app and set the Connected Device Type to SPC_M.
Step 3: Set the Business Platform Protocol Type to OCPP and configure the Preferred Networking Mode to 4G (wireless connection) or FE (network cable).
Note: You are advised to set the two networking modes to different values. If the first networking mode is unavailable, the system will automatically switch to the second networking method.
Step 4: If you’re using a Road SIM card, you must configure the APN settings by selecting Home → Power Unit → Wireless Comm. Select Configuration and enter the APN name accordingly:
When using a white Road SIM card or another connection method:
m2m.servicesWhen using a purple Road SIM card:
road.io
Step 5: Navigate back to Maintenance → Business Platform and select Comm. Parameters. Configure the following parameters in this menu:
Access Operation Platform Mode: Domain Name
Domain Name:
When using a white Road sim card or another connection method ws://ocpp.road.io/<provider-slug>
When using a purple Road sim card ws://ocpp-internal.road.io/<provider-slug>
Access Path: /1.6/<provider-slug>
Business Platform Port: 80
WebSocket: WS
Username and Password: leave empty
The charging station is now connected to the Road platform!