Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Configuration guide Hellonext
EVbee Service App
Configuration device: mobile phone
Follow the steps
Step 1: Download the EVbee Service App from the App store or Play Store and register your account.
Step 2: Open the app, select Create New Site, choose Commercial as the site type and fill in the site info.
Step 3: Enter the Main Fuse Data and the Circuit Data of the site.
Step 4: Add the charging station to the site by using one of the following methods:
Scan the QR code that’s located on the label of the charger.
Use the Bluetooth scanner in the app to find the charger.
Enter the Serial Number of the charger to add it to the site.
Step 5: Set up the Basic Settings by configuring the Max. charge power and the Time zone accordingly.
Step 6: Continue to the Network and backend settings, change the Mode to online and configure the following settings:
OCPP Backend:
When using a white Road sim card or another connection method ws://ocpp.road.io/<provider-slug>
When using a purple Road sim card ws://ocpp-internal.road.io/<provider-slug>
Charger ID: enter the serial number of the charger
Step 7: Select the preferred Communication Mode and configure the following APN if a Road SIM card is used:
When using a white Road SIM card or another connection method:
m2m.servicesWhen using a purple Road SIM card:
road.io
Step 8: Press Done to complete the configuration process.
The charging station is now connected to the Road platform!