Configuration Requirements
Road Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Installation manual ChargePost
Configuration device: Windows laptop with preinstalled browser
LAN Cable
Follow the steps
Step 1: Use the Installation manual of the ChargePost to safely complete the installation of the charger.
Step 2: Configure the network settings of your laptop as follows:
IP address: 172.17.10.99
Subnet mask: 255.255.255.0
Step 3: Use a LAN cable to connect the laptop to the service port on the PLC of the charger.
Step 4: Open your browser and enter the following IP address to gain access to the web interface of the charger: 172.17.10.100.8080
Note: contact the ADS-TEC support team if the web interface does not appear automatically.
Step 5: Use the login details from the product training to enter the Service HMI.
Step 6: Select the Network menu and select Routers to configure the APN settings of the U12 router.
Step 7: Select Set Credentials and fill in the following APN name to set up the connection with an Road sim card:
When using a white Road SIM card:
m2m.servicesWhen using a purple Road SIM card:
road.io
Note: the pin, username and password are not required to setup a connection with an E-Flux by Road sim card.
Step 8: Select the OCPP menu and enter the following values:
OCPP: WS
Host name: ocpp.road.io
When using a white Road SIM card or another connection method:
ocpp.road.ioWhen using a purple Road SIM card:
ocpp-internal.road.io
Path: /<provider-slug> (please fill in your on provider slug)
Select port: 443
CPID / backend ID: ‘Enter the serial number of the charger’
Security Profile: 0
Note: the other OCPP settings can be left empty.
Step 9: Save the settings and reboot the charger.